NUGEN Audio VisLM v2.8.3.3: How to Use It for Different Platforms, Standards, and Specifications
NUGEN Audio VisLM v2.8.3.3: A Powerful Loudness Metering Software for Audio Mixing and Mastering
If you are looking for a reliable, accurate, and easy-to-use loudness metering software for your audio mixing and mastering projects, you might want to check out NUGEN Audio VisLM v2.8.3.3. This software is designed to help you achieve optimal loudness levels for various platforms, standards, and specifications, while also enhancing the quality and consistency of your audio.
NUGEN Audio VisLM v2.8.3.3 [WiN-OSX] Incl Keygen-R2R
In this article, we will explain what NUGEN Audio VisLM v2.8.3.3 is and what it does, why loudness metering is important for audio mixing and mastering, what are the main features and benefits of NUGEN Audio VisLM v2.8.3.3, how to use it for your audio projects, and some tips and tricks for using it effectively.
What is NUGEN Audio VisLM v2.8.3.3 and what does it do?
NUGEN Audio VisLM v2.8.3 is a loudness metering software that allows you to measure, monitor, adjust, and report the loudness levels of your audio files in real-time or offline mode.
Loudness is a subjective perception of how loud a sound is, which depends on various factors such as frequency, duration, dynamic range, and listener's sensitivity. Loudness metering is a process of measuring the loudness of a sound using objective units such as LUFS (Loudness Units relative to Full Scale) or LKFS (Loudness K-weighted relative to Full Scale), which are based on international standards such as ITU-R BS.1770.
Loudness metering is important for audio mixing and mastering because it helps you to:
Ensure that your audio meets the requirements of different platforms, broadcasters, streaming services, or clients that have specific loudness targets or regulations.
Avoid clipping, distortion, or unwanted artifacts caused by excessive or inconsistent loudness levels.
Improve the clarity, balance, impact, and intelligibility of your audio by controlling the dynamic range and true peak values.
Enhance the listener's experience by providing a consistent and comfortable loudness level across different devices, environments, or genres of audio content.
NUGEN Audio VisLM v2.8.3.3 is a software that helps you to perform loudness metering with ease and precision. It supports various loudness standards and presets, such as EBU R128, ATSC A/85, Netflix, Spotify, YouTube, and more. It also provides you with a comprehensive and intuitive interface that displays the loudness levels, dynamics, true peak values, ReMEM function, flags, alerts, and history view of your audio files. You can also export and share the loudness data and reports in various formats, such as CSV, PDF, PNG, or XML.
How to use NUGEN Audio VisLM v2.8.3.3 for audio mixing and mastering
In this section, we will show you how to use NUGEN Audio VisLM v2.8.3.3 for your audio mixing and mastering projects. We will cover the following steps:
How to install and activate the software
How to choose the right loudness standard and preset
How to monitor and adjust the loudness levels, dynamics, and true peak values
How to use the ReMEM function, flags, alerts, and history view
How to export and share the loudness data and reports
How to install and activate the software
To install NUGEN Audio VisLM v2.8.3.3, you need to download the installer from the official website and run it on your computer. You can choose between the stereo or multi-channel version of the software, depending on your needs. You can also choose the supported formats and platforms for your audio workstation, such as VST, VST3, AU, AAX, or RTAS. The software is compatible with Windows 7 or higher and Mac OS X 10.7 or higher.
To activate NUGEN Audio VisLM v2.8.3.3, you need to purchase a license from the official website or from an authorized dealer. You will receive an email with a serial number and a link to register your product. You need to create an account on the NUGEN website and enter your serial number to generate an activation code. You can then enter the activation code in the software to unlock its full features. You can also use the iLok system to manage your license if you prefer.
How to choose the right loudness standard and preset
One of the first things you need to do when using NUGEN Audio VisLM v2.8.3.3 is to choose the right loudness standard and preset for your audio project. This will ensure that your audio meets the requirements of your target platform, broadcaster, streaming service, or client.
NUGEN Audio VisLM v2.8.3.3 supports various loudness standards and presets that are based on international specifications such as ITU-R BS.1770, EBU R128, ATSC A/85, OP-59, AGCOM 219/09/CSP, ARIB TR-B32, Netflix Loudness Standard, Spotify Loudness Normalization, YouTube Loudness Normalization, TIDAL Loudness Normalization, Apple Music Sound Check, AES Streaming Recommendation R-019-2019, and more. You can also create your own custom presets if you need more flexibility.
To choose the right loudness standard and preset for your audio project, you need to follow these steps:
Open NUGEN Audio VisLM v2.8.3.3 in your audio workstation as a plugin or as a standalone application.
Click on the menu button at the top left corner of the interface and select "Settings".
In the Settings window, click on the "Loudness" tab.
In the Loudness tab, you can see a list of available loudness standards and presets in a drop-down menu.
Select the loudness standard and preset that matches your target platform, broadcaster, streaming service, or client.
You can also adjust some parameters such as target level, tolerance range, gate threshold, true peak limit, measurement mode (momentary, short-term, or integrated), and time code offset.
Click on "OK" to save your settings and close the window.
You can also change the loudness standard and preset at any time by clicking on the loudness standard name at the top of the interface and selecting a different option from the drop-down menu.
How to monitor and adjust the loudness levels, dynamics, and true peak values
Once you have chosen the right loudness standard and preset for your audio project, you can start monitoring and adjusting the loudness levels, dynamics, and true peak values of your audio files using NUGEN Audio VisLM v2.8.3.3.
NUGEN Audio VisLM v2.8.3.3 provides you with a comprehensive and intuitive interface that displays various information and indicators about the loudness of your audio files. You can see the following elements on the interface:
The loudness meter shows the current loudness level of your audio in LUFS or LKFS units, depending on your settings. It also shows the target level, the tolerance range, and the gate threshold for your chosen loudness standard and preset. You can adjust the scale and range of the meter by clicking on the plus and minus buttons at the bottom of the meter.
The dynamic range meter shows the current dynamic range of your audio in LU (Loudness Units) units. It also shows the minimum and maximum values of the dynamic range for your chosen loudness standard and preset. You can adjust the scale and range of the meter by clicking on the plus and minus buttons at the bottom of the meter.
The true peak meter shows the current true peak value of your audio in dBTP (Decibels True Peak) units. It also shows the true peak limit for your chosen loudness standard and preset. You can adjust the scale and range of the meter by clicking on the plus and minus buttons at the bottom of the meter.
The ReMEM function allows you to recall and compare different measurements of your audio files. You can activate or deactivate this function by clicking on the ReMEM button at the top right corner of the interface. You can also select which measurement you want to recall by clicking on the drop-down menu next to the ReMEM button.
The flags indicate any violations or warnings that occur when your audio exceeds or falls below the target level, tolerance range, gate threshold, or true peak limit for your chosen loudness standard and preset. You can see the flags on the loudness meter, dynamic range meter, true peak meter, or history view. You can also customize the color, shape, size, and behavior of the flags in the Settings window.
The alerts notify you of any errors or issues that occur when using NUGEN Audio VisLM v2.8.3.3, such as license activation, software update, or compatibility problems. You can see the alerts on the top right corner of the interface. You can also customize the color, shape, size, and behavior of the alerts in the Settings window.
The history view shows the timeline of your audio file and the loudness levels, dynamics, true peak values, flags, and alerts that occurred during the measurement. You can zoom in or out of the history view by using the scroll wheel of your mouse or by clicking on the plus and minus buttons at the bottom of the history view. You can also navigate through the history view by using the arrow keys on your keyboard or by clicking and dragging on the history view.
To monitor and adjust the loudness levels, dynamics, and true peak values of your audio files using NUGEN Audio VisLM v2.8.3.3, you need to follow these steps:
Load your audio file in your audio workstation or in NUGEN Audio VisLM v2.8.3.3 as a standalone application.
Play your audio file and observe the loudness meter, dynamic range meter, true peak meter, ReMEM function, flags, alerts, and history view on the interface.
If your audio file does not meet the target level, tolerance range, gate threshold, or true peak limit for your chosen loudness standard and preset, you need to adjust the gain, compression, limiting, or other parameters of your audio file in your audio workstation or in NUGEN Audio VisLM v2.8.3.3 as a standalone application.
Repeat steps 2 and 3 until your audio file meets the requirements of your chosen loudness standard and preset.
How to use the ReMEM function, flags, alerts, and history view
NUGEN Audio VisLM v2.8.3.3 also provides you with some useful tools that can help you to analyze, compare, and troubleshoot your audio files. These tools are the ReMEM function, flags, alerts, and history view.
The ReMEM function allows you to recall and compare different measurements of your audio files. This can help you to see how your audio files have changed over time or across different versions or platforms. To use the ReMEM function, you need to follow these steps:
Open NUGEN Audio VisLM v2.8.3.3 in your audio workstation as a plugin or as a standalone application.
Load your audio file in your audio workstation or in NUGEN Audio VisLM v2.8.3.3 as a standalone application.
Play your audio file and observe the loudness meter, dynamic range meter, true peak meter, ReMEM function, flags, alerts, and history view on the interface.
Click on the ReMEM button at the top right corner of the interface to activate the ReMEM function.
You will see a drop-down menu next to the ReMEM button that shows a list of available measurements for your audio file.
Select the measurement that you want to recall and compare with the current measurement.
You will see a second set of meters and indicators that show the recalled measurement on the interface.
You can switch between different measurements by selecting them from the drop-down menu next to the ReMEM button.
You can also delete any measurement that you don't need by clicking on the trash icon next to the measurement name.
You can deactivate the ReMEM function by clicking on the ReMEM button again.
The flags indicate any violations or warnings that occur when your audio exceeds or falls below the target level, tolerance range, gate threshold, or true peak limit for your chosen loudness standard and preset. This can help you to identify and correct any problems or issues with your audio files. To use the flags, you need to follow these steps:
Open NUGEN Audio VisLM v2.8.3.3 in your audio workstation as a plugin or as a standalone application.
Load your audio file in your audio workstation or in NUGEN Audio VisLM v2.8.3.3 as a standalone application.
Play your audio file and observe the loudness meter, dynamic range meter, true peak meter, ReMEM function, flags, alerts, and history view on the interface.
If your audio file does not meet the target level, tolerance range, gate threshold, or true peak limit for your chosen loudness standard and preset, you will see a flag on the corresponding meter or indicator that shows the type and severity of the violation or warning.
You can hover your mouse over the flag to see more details about the violation or warning, such as the time code, the value, and the description.
You can click on the flag to jump to the time code where the violation or warning occurred in your audio file.
You can also see a list of all the flags that occurred during the measurement in the history view. You can click on any flag in the history view to jump to the time code where it occurred in your audio file.
You can also customize the color, shape, size, and behavior of the flags in the Settings window. You can access the Settings window by clicking on the menu button at the top left corner of the interface and selecting "Settings". In the Settings window, click on the "Flags" tab and adjust the parameters as you wish.
The alerts notify you of any errors or issues that occur when using NUGEN Audio VisLM v2.8.3.3, such as license activation, software update, or compatibility problems. This can help you to resolve any problems or issues with your software. To use the alerts, you need to follow these steps:
Open NUGEN Audio VisLM v2.8.3.3 in your audio workstation as a plugin or as a standalone application.
If there is any error or issue with your software, you will see an alert on the top right corner of the interface that shows the type and severity of the error or issue.
You can hover your mouse over the alert to see more details about the error or issue, such as the time code, the value, and the description.
You can click on the alert to open a dialog box that provides you with possible solutions or actions to resolve the error or issue.
You can also see a list of all the alerts that occurred during the measurement in the history view. You can click on any alert in the history view to open a dialog box that provides you with possible solutions or actions to resolve the error or issue.
You can also customize the color, shape, size, and behavior of the alerts in the Settings window. You can access the Settings window by clicking on the menu button at the top left corner of the interface and selecting "Settings". In the Settings window, click on the "Alerts" tab and adjust the parameters as you wish.
The history view shows the timeline of your audio file and the loudness levels, dynamics, true peak values, flags, and alerts that occurred during the measurement. This can help you to review and analyze your audio files in detail. To use the history view, you need to follow these steps:
Open NUGEN Audio VisLM v2.8.3.3 in your audio workstation as a plugin or as a standalone application.
Load your audio file in your audio workstation or in NUGEN Audio VisLM v2.8.3.3 as a standalone application.
Play your audio file and observe the loudness meter, dynamic range meter, true peak meter, ReMEM function, flags, alerts, and history view on the interface.
You will see a history view at the bottom of the interface that shows the timeline of your audio file and the loudness levels, dynamics, true peak values, flags, and alerts that occurred during the measurement.
You can zoom in or out of the history view by using the scroll wheel of your mouse or by clicking on the plus and minus buttons at the bottom of the history view.
You can navigate through the history view by using the arrow keys on your keyboard or by clicking and dragging on the history view.
You can click on any point on the history view to jump to the corresponding time code in your audio file.
You can also see the loudness levels, dynamics, true peak values, flags, and alerts of any point on the history view by hovering your mouse over it.
Tips and tricks for using NUGEN Audio VisLM v2.8.3.3 effectively
In this section, we will share some tips and tricks for using NUGEN Audio VisLM v2.8.3.3 effectively for your audio mixing and mastering projects. We will cover the following topics:
How to customize the interface and layout
How to use multiple instances and stems
How to compare different measurements and versions
How to integrate NUGEN Audio VisLM v2.8.3.3 with other NUGEN products
How to customize the interface and layout
NUGEN Audio VisLM v2.8.3.3 allows you to customize the interface and layout of the software according to your preferences and needs. You can change the color, size, position, orientation, and visibility of the meters, indicators, and views on the interface. You can also save and load different layouts for different projects or scenarios.
To customize the interface and layout of NUGEN Audio VisLM v2.8.3.3, you need to follow these steps:
Open NUGEN Audio VisLM v2.8.3.3 in your audio workstation as a plugin or as a standalone application.
Click on the menu button at the top left corner of the interface and select "Settings".
In the Settings window, click on the "Layout" tab.
In the Layout tab, you can see a list of available elements that you can add, remove, or modify on the interface.
Select the element that you want to customize and adjust its parameters such as color, size, position, orientation, and visibility.
You can also drag and drop the elements on the interface to rearrange them as you wish.
You can also click on the "Save Layout" button at the bottom of the Layout tab to save your current layout with a name of your choice.
You can also click on the "Load Layout" button at the bottom of the Layout tab to load a previously saved layout from a list of available layouts.
Click on "OK" to save your changes and close the window.
How to use multiple instances and stems
NUGEN Audio VisLM v2.8.3.3 allows you to use multiple instances and stems of the software for your audio projects. This can help you to measure, monitor, adjust, and report the loudness levels of different tracks, channels, or groups of your audio files. You can also link or unlink the instances and stems to control them separately or together.
To use multiple instances and stems of NUGEN Audio VisLM v2.8.3.3, you need to follow these steps:
Open NUGEN Audio VisLM v2.8.3.3 in your audio workstation as a plugin or as a standalone application.
Load your audio file in your audio workstation or in NUGEN Audio VisLM v2.8.3.3 as a standalone application.
If you are using the stereo version of the software, you can add up to two instances of the plugin to your audio workstation. If you are using the multi-channel version of the software, you can add up to 16 instances of the plugin to your audio workstation.